• Subscribe
  • Login
  • My Cart

+61 8 8357 4437

Terminal Configurations

Terminal Configurations

Liquid Systems has 6 different Terminal Configurations for liquid distribution setups on air seeder tillage bars.

With Air Tool Terminal Configurations, the line from each manifold outlet can be split into two separate delivery lines.

All terminal configurations include in-line check valves for quick shut-off and start-up and a range of line meters. All connections are push-fit for simple assembly and maintenance.

Refer to Flow & Resistance Charts HERE

Description

 

Air Tool – FIBP (Friction Tube)

LQS_ATFB
ORDER CODE: LQS-ATFB

  • 8mm Tees to split flow from manifold
  • 8mm delivery line
  • inline check valve
  • 8-5mm Stem Reducer
  • V4 rubber union
  • 5mm OD x 1.2 ID Yellow friction terminal tube

Fits to 3/8” (9.53mm) OD x 1/4” (6.2.7mm) ID stainless steel delivery tube (not included).

Permits large bore. Ultra-low to high application range. Ability to apply difficult materials. No Line meter is used with this option as back pressure is created via line friction – the longer the line the higher the back pressure.

 

Air Tool – DBS FIBP (Friction Tube)

LQS-AT3F DBS Low Volume FIBP

ORDER CODE: LQS-AT3F

  • 8mm Tees to split flow from manifold
  • 8mm delivery line
  • inline check valve
  • 8-4mm Stem Reducer
  • 4mm OD x 1.8 ID Purple (30mm Length) terminal tube
  • 4-3mm Stem Reducer
  • 12 x 3mm Cable Gland
  • 1/4″ V3 Rubber union
  • 3mm OD x 1.2 ID Orange friction terminal tube

Fits to 1/4” (6.35mm) OD stainless steel delivery tube (not included). Permits large bore. Ultra-low to high application range. Ability to apply difficult materials. No Line meter is used with this option as back pressure is created via line friction-the longer the line the higher the back pressure.This was originally designed with DBS liquid ready points in mind. However, this assembly attaches to most commercial 6.35mm (1/4”) stainless steel delivery tubes. The 3mm LLDPE terminal tube passes directly through 1/4″ tube.

 

Air Tool – Standard (Line Meter)

LQS_ATST
ORDER CODE: LQS-ATST

Fits to 3/8” (9.53mm) OD x 1/4” (6.2.7mm) ID stainless steel delivery tube (not included).

Good stream control across a wide range of application rates. For openers spaced 9”-15”.

 

Air Tool – High Rate (Line Meter)

LQS_ATHR
ORDER CODE: LQS-ATHR

Fits to 1/4” (6.35mm) OD stainless steel delivery tube (not included).

Suited for high rate applications or points with ¼” liquid delivery tubes.

 

Air Tool – Low Rate 4mm (A) (Line Meter)

LQS_ATL4_A
ORDER CODE: LQS-ATL4

  • 8mm Tees to split flow from manifold
  • 8mm delivery line
  • inline check valve
  • line meters 3 sizes inc: Red/Green/Blue
  • 8-4mm Stem Reducer
  • V3 rubber union
  • 4mm OD x 1.8mm ID terminal tube

Fits to 6.35mm (1/4”) OD x 4.53mm ID stainless steel delivery tube (not included).

Suitable for rates up to 100L/Ha, 10 US Gal/Acre on 9-12″ Spacing

Air Tool – Low Rate 4mm (B) (Line Meter)

LQS_ATL4_B
ORDER CODE: LQS-ATL4

  • Same Terminal Assembly as LQS-ATL4, but different configuration

Extended version of ATL4 configured to raise the position of check valve & line meter to avoid stubble damage.