Terminal Configurations
AIR TOOL – TERMINALS
Liquid Systems has 6 different Terminal Configurations for liquid distribution setups on air seeder tillage bars. With Air Tool Terminal Configurations, the line from each manifold outlet can be split into two separate delivery lines. All terminal configurations include in-line check valves for quick shut-off and start-up and a range of Line Meters or Friction Tube. All connections are push-fit for simple assembly and maintenance.
Which restrictive device should i use, line meters or friction tube? Go to the Application & Resistance Charts HEREDescription
| Air Tool – FIBP 3mm Friction Tube |
|---|
ORDER CODE: LQS-AT3F
- 8mm Tees to split flow from manifold
- 8mm Delivery Tube
- Inline Check Valve
- 8-6mm Stem Reducer
- 6-3.2mm Stem Reducer
- 3mm OD x 1.2 ID Orange Friction Terminal Tube
- Line Locker
- 1/4″ V3 Rubber Union
- Fits to 1/4” (6.35mm) OD stainless steel delivery tube (not included). Permits large bore. Ultra-low to high application range. Ability to apply difficult materials.
| Air Tool – FIBP 4mm Friction Tube |
|---|
ORDER CODE: LQS-AT4F
- 8mm Tees to split flow from manifold
- 8mm Delivery Tube
- Inline Check Valve
- 8-4mm Stem Reducer
- 4mm OD x 1.8 ID Purple Friction Terminal Tube
- Line Locker
- V5 6.5mm Rubber Union
- Fits to 3/8” (9.53mm) OD x 1/4” (6.27mm) ID stainless steel delivery tube (not included).
Permits large bore. Ultra-low to high application range. Ability to apply difficult materials.
| Air Tool – FIBP 5mm x 1.2mmID Friction Tube |
|---|
ORDER CODE: LQS-AT5F
- 8mm Tees to split flow from manifold
- 8mm Delivery Tube
- Inline Check Valve
- 8-5mm Stem Reducer
- 5mm OD x 1.2 ID Yellow Friction Terminal Tube
- Line Locker
- V5 6.5mm Rubber Union
- Fits to 3/8” (9.53mm) OD x 1/4” (6.27mm) ID stainless steel delivery tube (not included).
Permits large bore. Ultra-low to high application range. Ability to apply difficult materials.
| Air Tool – FIBP 5mm x 1.8mmID Friction Tube |
|---|
ORDER CODE: LQS-AT5PBF
- 8mm Tees to split flow from manifold
- 8mm Delivery Tube
- Inline Check Valve
- 8-5mm Stem Reducer
- 5mm OD x 1.8 ID Purple/Black Friction Terminal Tube
- Line Locker
- V5 6.5mm Rubber Union
Fits to 3/8” (9.53mm) OD x 1/4” (6.27mm) ID stainless steel delivery tube (not included).
Permits large bore. Ultra-low to high application range. Ability to apply difficult materials.
| Air Tool – Standard (Line Meter) |
|---|
ORDER CODE: LQS-ATST
- 8mm Tees to split flow from manifold
- 8mm Delivery Tube
- Inline Check Valve
- Line Meters (choose 3 sizes included)
- 8-5mm Stem Reducer
- 5mm OD x 2.5mm Terminal Tube
- Line Locker
- V5 6.5mm Rubber Union
- Fits to 3/8” (9.53mm) OD x 1/4” (6.27mm) ID stainless steel delivery tube (not included).
Good stream control across a wide range of application rates. For openers spaced 9”-15”.
| Air Tool – High Rate (Line Meter) |
|---|
ORDER CODE: LQS-ATHR
- 8mm Tees to split flow from manifold
- 8mm Delivery Tube
- Inline Check Valve
- Line Meters (choose 3 sizes included)
- 8mm Terminal Tube
Fits to 1/4” (6.35mm) OD stainless steel delivery tube (not included).
Suited for high rate applications or points with ¼” liquid delivery tubes.
PLANTER – TERMINALS
Liquid Systems has 2 different terminal configurations for liquid distribution setups on planters. With Planter Terminal Configurations, each manifold outlet connects to an individual delivery line. All terminal configurations include inline check valves for quick shut-off and start-up and a range of line meters to suit the target application rates. All connections are push-fit for simple assembly and maintenance.
Refer to Flow & Resistance Charts HERE
| Planter- Standard (Line Meter) |
|---|
ORDER CODE: LQS-PTST
- 8mm Tees to split flow from manifold
- 8mm Delivery Tube
- Inline Check Valve
- Line Meters (choose 3 sizes included)
- 8-5mm Stem Reducer
- Line Locker
- V5 6.5mm Rubber Union
- 5mm OD x 2.5mm Terminal Tube
Fits to 3/8” (9.53mm) OD x 1/4” (6.27mm) ID stainless steel delivery tube (not included).
Good stream control across a wide range of application rates. For openers spaced 9”-15”.
| Planter – High Rate (Line Meter) |
|---|
ORDER CODE: LQS-PTHR
- 8mm Tees to split flow from manifold
- 8mm Delivery Tube
- Inline Check Valve
- Line Meters (choose 3 sizes included)
- 8-6mm Stem Reducer
- Line Locker
- V5 6.5mm Rubber Union
- 6mm OD x 4.25mm Terminal Tube
Fits to 3/8” (9.53mm) OD x 1/4” (6.27mm) ID stainless steel delivery tube (not included).
Suitable for high rate applications.
